Original CyberQ Wi-Fi Quick-start Guide for Firmware v2.3 and 3.1

Articles

Pairing Other Devices to the CyberQ in Hot-spot Mode Wifi Temperature Control
Pairing other devices to the CyberQ in hot-spot mode The most basic way to use the CyberQ’s features is by directly pairing it with another Wi-Fi device in hot-spot mode. While this method doesn’t enable all the CyberQ’s f...
Linking the CyberQ Temperature Control to a Wi-Fi Router in Infrastructure Mode
Linking the CyberQ to a Wi-Fi Router in Infrastructure Mode This procedure should be performed while you are in range of your Wi-Fi network. To set up a link from scratch, proceed with the following steps: Power up the CyberQ and ...
CyberQ Wifi Switching Modes Between Home and Away Configurations
Mode Switching As we have seen above, a key improvement in firmware v2.3/3.1 is being able to store parameters for hot-spot or infrastructure linking away from home and infrastructure linking to your home network, then easily switch betwee...
BBQ CyberQ Wifi Temperature Control Full User Manual
FULL USER MANUAL The latest complete user manual for version 2.3/3.1firmware is available on our website in the manuals section: http://bbqguru.com/Support?page=Manuals . Other material you may find helpful, including videos, screen ...
BBQ CyberQ Wifi Temperature Control Safety Warnings
SAFETY WARNINGS 
 INSTALLATION / SAFETY INFORMATION. READ AND UNDERSTAND THIS USER GUIDE COMPLETELY BEFORE INSTALLING OR USING THIS PRODUCT!! WARNING : FIRE HAZARD, BURN HAZARD!! Even quality electronics can fail CAUSING THE BLOW...
BBQ Guru CyberQ Wifi Temperature Control Device Limited Warranty
LIMITED WARRANTY Return criteria To qualify, all returns and exchanges must be accompanied by the original receipt, the original documentation, instruction manuals, parts and components (including probes, controller, and accessories...